Carlin EZ PRO GAS BURNER (IN ORIGINAL FACTORY BOX) –1-DAY FAST SHIPPING!

Description

CARLIN EZ PRO
OIL to GAS conversion burner
model # 9859210FRU
***not including technical support from us***
FAST SHIPPING!
SHIPS FOLLOWING BUSINESS DAY!
***this burner will be shipped to you
in a factory sealed box
***
[complete with gas valve, gasket, nipple, wire nuts, & all hardware]**  yours may
be customized by you to
have a different band installed, a different diffuser plate installed, a different size orifice drilled and installed, you may also modify it to have the gas inlet on the opposite side, all these options are explained in the manual which is included with your purchase!**
***EACH UNIT
NEEDS TO BE CUSTOMIZED
TO
YOUR SPECIFIC APPLIANCE
&
BTU INPUT RATING!***
This burner requires much set-up work!
BEWARE OF OTHER SELLERS!
***SOME SELLERS WILL SELL YOU THIS EXACT BURNER FOR LESS AND LEAVE YOU HOLDING THE BAG!
WE ARE THERE FOR YOU FROM START TO FINISH.
ABOUT OTHER SELLERS SELLING THIS UNIT:
NORMALLY–THERE IS ALOT TO DO ON THIS UNIT BEFORE YOU ARE READY TO INSTALL IT.
PLEASE DO NOT THINK THAT YOU JUST BUY IT AND INSTALL IT AND YOU ARE DONE
(w
hat
other sellers tell you)
—NO–NO—NO!
THERE IS DRILLING,
DE-BURRING
, ASSEMBLY PREPARATION, PIPE JOINT COMPOUND, BAND CHOICE & ADJUSTMENT, BAFFLE SELECTION!
THEY
DON’T DO ANYTHING FOR YOU EXCEPT SELL YOU THIS UNIT.
WE ON THE OTHER HAND COMPLETELY ADVISE YOU IN ORDER FOR YOU TO PREPARE AND ASSEMBLE THIS UNIT
IF TECHNICAL SUPPORT IS PURCHASED AT TIME WITH BURNER
This is the burner that should be used in almost every gas conversion job around.  It is virtually maintenance free, SUPER RELIABLE,  and it is a NAME BRAND item!
This burner requires much set-up work!
BEWARE OF OTHER
PATRIOTIC
SELLERS ON EBAY WHO ATTRACT YOU WITH FANCY BANNERS, FLAGS, CLOWNS, OR DANCING BEARS!
THEY WANT YOU TO BE
PATRIOTIC
TO THEM BUT IN FACT THEY ARE NOT EXPERIENCED CONTRACTORS AND WILL FORGET YOU RIGHT AFTER THEY MAKE THE SALE.
THEY ONLY SELL THE UNIT AND LEAVE YOU HIGH AND DRY AFTER THE SALE!
THEY HAVE NO ASSOCIATION OR EXPERIENCE WITH THE ACTUAL INSTALLATION AND MAINTENANCE OF THESE UNITS AND CANNOT AND WILL NOT EVEN ADVISE YOU ON ANY ISSUES YOU MAY HAVE!
THEY
CLAIM
IT IS A LIABILITY ISSUE—THEY JUST DON’T KNOW.  THAT IS THE TRUTH!
When technical support is purchased  (ADDITIONAL CHARGE):
WE WILL BE STANDING BY YOUR SIDE FROM BEGINNING TO FINISH
(when technical support is purchased)
.
BASED ON THE INFORMATION YOU PROVIDE TO US WE WILL
ADVISE YOU
ON
HOW TO DO ALL THE SETTING UP OF YOUR NEWLY PURCHASED UNIT.
WE WILL
ADVISE YOU
HOW CUSTOM DRILL & DE-BURR THE ORIFICE, ADJUST THE AIR BAND, INSTALL THE GAS VALVE, INSTALL THE PROPER BAFFLE,
AND HOW TO
INSTALL ALL
OF
THE PARTS TO MAKE THIS AN EASY AND SIMPLE INSTALLATION FOR YOU.
ALL YOU WILL NEED TO DO IS TO FOLLOW THE SAMPLE PICTURES AND MAKE YOUR PLUMBING LOOK JUST LIKE THE PICTURES IN THE INSTRUCTIONS AND PRESSURE TEST THE PIPES WHEN DONE.
WE WILL GUIDE YOU THROUGH ALL OF THIS AS NEEDED.
WHEN FINISHED YOU WILL NEED TO HAVE AN EXPERIENCED TECHNICIAN DO A COMBUSTION ANALYSIS TO OPTIMIZE EFFICIENCY AND TO MINIMIZE ANY NOXIOUS EXHAUST GASES.
WE WARRANTY WHAT WE SELL USUALLY LONGER THAN THE MANUFACTURER DOES.
BUY FROM US WITH CONFIDENCE!
WE ARE EXPERIENCED CONTRACTORS
AND KNOW HOW TO DO IT RIGHT SO WE CERTAINLY CAN ADVISE YOU HOW TO DO THIS JOB RIGHT!
***when technical support is purchased***
(We are not like the OTHER GUYS!  We will be with you for technical support post-sale as needed to complete your installation!  You will be issued a cell phone number to our technical support technician upon receipt of your unit) (
***when technical support is purchased at time of sale***)
This unit requires precision drilling and reaming of the orifice for the proper BTUs desired.
You must give us the equipment information and BTU information from YOUR current unit FOR US TO ASSIST YOU WITH TECHNICAL SUPPORT.
When technical support is purchased
This burner also requires
COMBUSTION TEST EQUIPMENT
when INSTALLATION IS COMPLETE  to be able to measure the exhaust gases and determine if the combustion is safe & correct.
Adjustments can be made depending on the Test Equipment readings and should be done by a licensed GAS technician.
NOTE:
This unit should be installed by an experienced gas installer/service technician BUT if you are mechanically inclined and know gas plumbing and some electrical, you can do most of the installation yourself and save big $$$$.
You WILL however need a technician when done to check your work for possible gas leaks with a pressure tester.
You will also need him to possibly fine-tune your combustion adjustments for proper burn and to adjust it for minimum noxious fumes and pollutants.
DISCLAIMER—-PLEASE NOTE:
*Some localities may require a chimney liner be installed when using gas fired equipment.  Please check your local codes.
*Most localities also require a pressure test (by a licensed gas plumber) of the gas plumbing whenever a change/addition is made to the new or existing gas plumbing.
*Also some localities may not allow a homeowner to perform his own gas plumbing or electrical work at all.  Some do and require a pressure test as stated above.  Check your local codes.
*We attempt to assist with technical guidance as best as possible with phone conversations and email/texts, Facetime™, and other media, however BUYER assumes all responsibility when purchasing this product as we cannot guarantee the quality of work by anyone who is not licensed and/or experienced in the installation and use of this product.
*Incorrect or faulty installation of this product can cause serious injury or even death!
*Please check with your local gas plumber BEFORE putting any self-installed appliance into service.
*This unit is offered for sale to knowledgeable handymen and professionals who will also secure the assistance of a licensed gas plumber/electrician or technician to oversee the job.  Buyer assumes any and all risks associated with the purchase, installation, and any related consequences in the installation and or use of this item.
SPECIFICATIONS:
BTU
50,000 to 275,000
BTU
(precision drilling or orifice required–we can do it for you!)
[GREATER BTU AVAILABLE IF NEEDED–different models available at a higher price–up to 1,100,000 BTU]Electrical
Power:
120 vac, 60Hz, 1-Phase
Fuels
Natural Gas
or
Propane Gas (LP)
Technical support may be reached
Ask for Charlie   9AM – 9PM EST.
ALL STOCK ORDERS SHIP WITHIN
6
HOURS OF
PAYMENT!
CUSTOM ORDERS
(like this one)
usually ship within 72-96 HOURS.
FAST SHIPPING!
NEED HELP?
Call our technical support team –
Ask for Charlie 9AM-9PM only.
HAVE NO FEAR-BoilerGeek IS HERE!
This item ships out of our
LINDENHURST, NY 11757 shipping facility.
We are no longer permitted to
display our telephone number as per eBay policy.
You may contact us by looking up
our telephone number yourself on the web (Google) .
Sorry for the inconvenience.
‘BOILERS
R US’ will ship this item to you directly.
We accept PAY-PAL only.
ALL SALES MUST GO THROUGH E-BAY!
**installation available in NY, NJ, C
T
, DE, MD, PA, VA, MA,
RI,
VT, MA,
for an additional fee ($850-$1250)***
28–25/18/15
This item ships out of our
LINDENHURST, NY 11757 shipping facility.
We are no longer permitted to
display our telephone number as per eBay policy.
You may contact us by looking up
our telephone number yourself on the web (Google) .
Sorry for the inconvenience.
‘BOILERS
R US’ will ship this item to you directly.